88

IGP-RAPID®complete 881TA

Deep matt, highly reactive polyester single-coat powder coating with a fine texture, specially developed for temperature-sensitive substrates.

download PDF
Characteristics Powder properties Film properties Processing More information

Characteristics

  • Deep matte
  • Fine texture
  • Uni colours
  • Indoor quality
  • Increased scratch resistance

Powder properties

Suitability for storage:
min. 6 months at ≤ 15 °C
in an unopened original container

Film properties

Tested on
Object temperature:
130 °C, 3 min.

Processing

Pre-treatment

If the surface finish of the MDF ex-works does not meet the quality requiremens of the end product, the surface has to be sanded. This will ensure that the material has an evenly smooth surface and is free of any contaminants, minor scratches, dust, grease, etc. For more information, see IGP-TI 111.

Coating devices
All conventional electrostatic systems with corona charging.
For the construction and operation of powder coating plants, the following regulations must be complied with: ATEX RL 2014/34/EU, EN 50177, DIN EN 16985.
Curing conditions
TObjectt mint max
125 °C5 minutes9 minutes
130 °C3 minutes7 minutes
140 °C2 minutes5 minutes
In order to determine ideal curing conditions, we recommend practical trials with the respective object and curing oven.

Further information

This application-related advice is given to the best of our knowledge. However, this information is non-obligatory and does not exempt you from carrying out your own tests. Application, use and processing of these products are beyond our control and are therefore on your responsibility. Consult the Safety Data Sheet prior to use.