10
IGP-KORROPRIMER 1001A-V0
10
Epoxy resin primer for best possible corrosion protection on steel, and in V-version also on galvanized steel.
IGP-KORROPRIMER 1001 is the modern classic based on epoxy resins and was specially developed for steel substrates. With its pronounced wetting behavior, it ensures excellent adhesion to the substrate and, thanks to its barrier effect, the highest possible corrosion protection. Also available in V-version for outgassing substrates.
- Characteristics
- Deep matte
- Smooth finish
- Uni colours
- Indoor quality
- Special properties
- Degassing optimized
- Curing conditions
TObject t min t max 170 °C 25 minutes 30 minutes 180 °C 20 minutes 25 minutes 190 °C 10 minutes 15 minutes When curing thick steel components we recommend to gel the primer and fully cure the part with the top coat.
To avoid intercoat adhesion problems the maximum air temperature should be limited to 210°C.
When curing in directly heated gas ovens, a sample should be done in advance to ensure the intercoat adhesion with the following top coat.
Please contact our technical customer support.
In order to determine ideal curing conditions, we recommend practical trials with the respective object and curing oven.
