33

IGP-DURA®mix 3303E-A1

Matte, elegant powder coating with a large variety of special effects such as thin-coat solutions.

app.layout.tds_detail.characteristics app.layout.tds_detail.powder_properties app.layout.tds_detail.film_properties app.layout.tds_detail.processing app.layout.tds_detail.more_information app.layout.to_top
app.layout.contents
app.layout.tds_detail.characteristics app.layout.tds_detail.powder_properties app.layout.tds_detail.film_properties app.layout.tds_detail.processing app.layout.tds_detail.more_information app.layout.to_top

app.print.technical_data_sheet.characteristics.title

  • Matte
  • Smooth finish
  • Pearl mica
  • Indoor quality

app.print.technical_data_sheet.powder_properties.title

app.print.technical_data_sheet.powder_properties.particle_size:
< 100 μm
app.print.technical_data_sheet.powder_properties.solid:
> 99 %
app.print.technical_data_sheet.powder_properties.density:
1.3 kg/l-1.6 kg/l
app.print.technical_data_sheet.powder_properties.storage_suitability:
app.print.technical_data_sheet.powder_properties.storage_suitability.prefix 24 months app.print.technical_data_sheet.powder_properties.storage_suitability.at 25 °C
in an unopened original container
app.print.technical_data_sheet.powder_properties.color_tones:
RAL Metallic and individual metallic colors on request

app.print.technical_data_sheet.film_properties.title

app.print.technical_data_sheet.film_properties.tested_on.title
app.print.technical_data_sheet.film_properties.tested_substrate:
Steel, 0.5mm
app.print.technical_data_sheet.film_properties.film_thickness:
60 μm - 80 μm
app.print.technical_data_sheet.film_properties.object_temperature:
190 °C, 10 min.
app.print.technical_data_sheet.film_properties.appearance
app.print.technical_data_sheet.film_properties.gloss_level:
25-35 R’/60°
DIN EN ISO 2813 2015-02
app.print.technical_data_sheet.film_properties.mechanical_tests
Cross-cut adhesion test
Gt 0
DIN EN ISO 2409 2020-12
Mandrel bending test
≤ 5 mm
DIN EN ISO 1519 2011
Impact test
≥ 10 inchp.
ASTM D 2794 1993
Erichsen cupping
≥ 5 mm
DIN EN ISO 1520 2007-11
Buchholz hardness
≥ 80
DIN EN ISO 2815 2003-10 (Anhang A)
app.print.technical_data_sheet.film_properties.corrosion_tests
Condensation water test, 500-1000h*
No infiltration, no blisters. *depending on pretreatment
DIN EN ISO 6270-2 2018-04
Natural salt spray test, 500-1000h*
No infiltration, no blisters.
*depending on pretreatment.
DIN EN ISO 9227 2017-07
app.print.technical_data_sheet.film_properties.chemical_tests
Organic solvents
Limited resistance to organic solvents.

app.print.technical_data_sheet.processing.title

app.print.technical_data_sheet.processing.substrates

The substrate must be free from oil, grease and oxidation products. The pretreatment depends on the type of substrate and the corrosion protection to be achieved. We recommend the following pretreatments:

Aluminium
  • Chromating according to DIN EN 12487
  • Pre-anodization
  • Chrome-free pretreatment according to GSB International and QUALICOAT specifications
Steel
  • Zinc phosphating
  • Iron phospating
Galvanised steel
  • Zinc phosphating
  • Chrome (III) passivation
  • Chromating according to DIN EN 12487

The suitability of the pretreatment method used is generally to be tested by the coater in advance with appropriate test methods. The minimum requirement for aluminium substrates / galvanised steel components is to carry out a boiling water test with a subsequent cross-cut adhesion and tape test. We refer to the guidelines of the GSB International, Qualicoat and Qualisteelcoat certifications. For further information: see also our special leaflet on pre-treatment (IGP-TI 100).

app.print.technical_data_sheet.processing.coating_devices
All conventional electrostatic systems with corona charging.
For the construction and operation of powder coating plants, the following regulations must be complied with: ATEX RL 2014/34/EU, EN 50177, DIN EN 16985.
app.print.technical_data_sheet.processing.recommended_film_thickness
60 μm - 80 μm
A homogeneous coating result with textured paints or colour or article-specific differences in hiding power may require higher Film thicknesses. The corresponding processing guidelines must be observed.
For a preliminary calculation of the required powder coating quantity, the required Film thickness must be determined for each specific article.
app.product_group.detail.curing_conditions.title
app.print.technical_data_sheet.processing.curing_condition.temperatureapp.print.technical_data_sheet.processing.curing_condition.duration_minapp.print.technical_data_sheet.processing.curing_condition.duration_max
180 °C15 minutes25 minutes
190 °C10 minutes15 minutes
200 °C8 minutes12 minutes
In order to determine ideal curing conditions, we recommend practical trials with the respective object and curing oven.
app.print.technical_data_sheet.processing.reclaimability
Small portions of recovered powder can be added, automatically if possible, to the fresh powder. Important: Keep overspray to an absolute minimum. Processing instruction VR201.1 must be observed.

app.print.technical_data_sheet.more_information.title

app.print.technical_data_sheet.packaging.title
20 kg cardboard box with inserted antistatic PE liner
500 kg cardboard container with 25 antistatic PE-liners each 20kg
app.print.technical_data_sheet.more_information.protection_of_coated_parts
Coated parts should be packed after cooling with suitable materials without plasticizers. They should be stored protected from the weather to avoid the formation of condensation and thus water spots on the coating.
app.print.technical_data_sheet.more_information.cleaning
The coated parts must be cleaned according to the directives RAL-GZ 632 or SZFF 61.01. Technical Information IGP-TI 106 must also be observed when dealing with pearl mica effects.
app.print.technical_data_sheet.more_information.paint_removal_and_disposal
After use, coated goods should be supplied to the normal recycling process. The disposal methods for sludges or residual powders must be observed in accordance with the local official provisions whilst taking Waste Code “080201 Coating Powder Wastes” in accordance with the European Waste Catalogue into consideration.
app.layout.technical_data_sheet.infobox